Threaded Cam Lock Cylinder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.23 – €1.51 net (excluding VAT)
For file: Threaded Cam Lock Cylinder_0.2mm_PLA_MK3S_1h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.62 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a working lock that is operated by inserting the key into the cylinder and turned.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 354
- Makes
- 1
- Views
- 1,690
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This lock has a spring loaded wafer that locks the cylinder core in position until the key is inserted. The tailpiece slips onto the inside end of the core and can be held in place with a screw. The pilot hole is designed for a #8-32 machine screw (needs to be tapped before screwing in the screw), but an M4 screw would also work. The tailpiece is a tight fit, so a screw is not necessarily needed.
The lock fits a standard cam lock opening, and the nut will hold it in place. Careful not to tighten too much! The lock cylinder will snap (I discovered the hard way…) Use a 7/8" wrench or socket on the nut.
The print is set up for PLA, with solid infill, 0.2mm quality. Hollow is not strong enough.
Any feedback is welcome!