1 / 1
Baseus 65w mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a sleeved mount remixed for the Baseus 65W GaN Charger The mount is designed to pass the wall plug wire through the side of the mount. The positive stop on the front prevents the charger from pulling out of the mount when disconnecting a USB cable but can be pushed down slightly to remove the block from the sleeve.
Original model had holes for wall mounting but as this will be mounted on furniture I have removed those in favour of adhesive strips.
UPDATE: my adhesive tape was not sticky enough so have added back screw holes.