Configurable Hex Tile External Cover - Cooler Master Elite Liquid Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This set of parts enables the user to create and print custom decorative tiles for their CM Elite Liquid AIO cooler.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Trick out your AIO cooler! Print new tall cooler cover with the hex tile pocket and swap in/out different decorative tiles to best fit your build/mood. Feel free to use one of the tiles I created or download and edit the "blank" tile and put on your own design.
Print the upper half of the tile in a different color for more contrast to better view the design. If you print the lower half of the tile in a semi-transparent filament, the AIO LEDs will shine through for a neat "shadow" effect of whatever design is on the tile. Depending on your hose location, you can rotate the tiles for proper orientation.
Tile installation/removal is tool-less; the tile stays in place with small nubs that mate with small pockets on the hex pocket.
Recommended print settings:
Material: PETG (since it'll be in your hot PC case)
Nozzle: 0.4mm
Layer height: 0.2mm or lower for best resolution of the retainment nubs/pockets
Supports may be required on the "external cooler cover" part for the hex tile overhang. The hex tiles require no supports.