LayersFactory
Zgłoś model
1 / 6
Logitech C270 Wall Mount (3D Printer Timelapse Bracket) — zdjęcie 1
1 / 6

Logitech C270 Wall Mount (3D Printer Timelapse Bracket)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

messedupRyan

messedupRyan

@messedupRyan

Simple, sturdy wall mount for the Logitech C270 webcam—perfect for capturing clean timelapse footage of your 3D prints.

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

📸 Logitech C270 Wall Mount (3D Printer Timelapse Bracket)

Simple, sturdy wall mount for the Logitech C270 webcam—perfect for capturing clean timelapse footage of your 3D prints.

🧩 Overview

This is a compact wall-mounted bracket designed specifically for the Logitech C270. It holds the camera securely in a fixed position, making it ideal for consistent, repeatable timelapse shots of your printer.

I designed this to solve a common problem: getting a stable, permanent camera angle without tripods or makeshift mounts.

✨ Features

  • 🎯 Perfect fit for Logitech C270

  • 🧱 Rigid, stable mount (no wobble during long prints)

  • 🪛 Wall-mounted with two screw holes

  • 📦 Compact footprint – stays out of the way

  • 🖨 No supports required

  • ⚡ Quick print (~1–2 hours depending on settings)

🛠 Print Settings

  • Material: PLA (PETG also works great)

  • Layer height: 0.2mm

  • Infill: 15–25%

  • Walls: 3+

  • Supports: ❌ None needed

  • Orientation: Print flat on the back (as shown in photos)

🔩 Installation

  1. Print the bracket

  2. Mount to wall/enclosure using:

    • Wood screws, or

    • Drywall anchors (recommended for stability)

  3. Slide the Logitech C270 into the holder

  4. Adjust your camera angle before tightening everything down

🎥 Use Case: Timelapse Setup

This mount is designed to:

  • Keep your camera fixed relative to the printer

  • Avoid shifting between prints

  • Provide a clean, consistent framing for timelapse videos

Works great with:

  • OctoPrint timelapse plugins

  • Obico / Octolapse

  • Native slicer-based timelapse setups

⚠ Notes

  • Designed specifically for the Logitech C270 — fit may not work for other models

  • Friction fit is intentional; snug but not overly tight

  • If your printer vibrates a lot, consider PETG for a bit more toughness

🧠 Design Notes

  • Reinforced mounting holes to prevent cracking

  • Slight tolerance added for easy insertion/removal

  • Minimalist geometry to keep print time low and strength high

📷 Recommended Setup Tip

Mount slightly above or level with the print bed and angle downward for the best timelapse perspective.

👍 If You Like It

  • Drop a like ❤

  • Post your makes 📸

  • Let me know if you want versions for other cameras

Tagi

camera3dwallprintermountoctoprintwebcamlogitechc270timelapse