REV2 Anycubic Vyper MGN12H Y-axis Linear Rail kit

It's my take of linear rail kit I've designed for my Anycubic Vyper. The kit includes the left and right MGN12H mounts that replace the V-roller bearings and original Y-axis endstop mount for 2020 extrusion.

[UPDATE] Through some changes I've decided to update the design. The new version is completely redesigned, with correct hole placement and actually lets you adjust everything without problems. Additionally I've added M5 nut stoppers, so the nut doesn't lift when you try to tighten the screw.

The endstop also got completely redesigned. The hole is a little bit thicker which allows for better contact with extrusion profile.

Print 2x carriage mount and endstop, mount endstop cariage before instaling endstop on it, reuse stock M2.5 screws to install endstop on a carriage and voila!

Print parts as there are oriented!!!

Feel free to remix it and improve the parts. STEP files are included in the zip.

The M5 nuts can be salvaged from the original roller mounts.

Print settings:

• ABS/ASA or any other heat resistant material required
• 0.4mm width
• 0.2mm height
• No supports needed

Printed on enclosed stock Anycubic Vyper.