The Guardian Spirit - Stylized Wolf Bust Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Capture the wild elegance of the forest with The Guardian Spirit.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
To ensure the flowing mane prints perfectly and the facial features remain sharp, I recommend the following:
Layer Height: 0.2 mm
Infill Density: 10% - 15%
Infill Pattern: Gyroid (Essential for handling the organic curves and providing uniform strength)
Perimeters: 3 (Helps with the steep angles of the fur "flames")
Supports: Yes (Use Tree/Organic supports specifically for the chin, ears, and some of the lower mane overhangs)
Material: PLA works best. For a "museum look," try Bronze Silk PLA or a Matte Grey.
Post-Processing & Tips
Orientation: Print the model upright as provided for the best detail on the face.
Support Removal: The fur tips can be sharp; take your time removing supports to avoid snapping any of the decorative points.
Patina Effect: If you print in copper or bronze, you can apply a light teal acrylic wash in the crevices to mimic an aged patina look like in the preview image.