The Guardian Spirit - Stylized Wolf Bust Sculpture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Capture the wild elegance of the forest with The Guardian Spirit.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 56
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
To ensure the flowing mane prints perfectly and the facial features remain sharp, I recommend the following:
Layer Height: 0.2 mm
Infill Density: 10% - 15%
Infill Pattern: Gyroid (Essential for handling the organic curves and providing uniform strength)
Perimeters: 3 (Helps with the steep angles of the fur "flames")
Supports: Yes (Use Tree/Organic supports specifically for the chin, ears, and some of the lower mane overhangs)
Material: PLA works best. For a "museum look," try Bronze Silk PLA or a Matte Grey.
Post-Processing & Tips
Orientation: Print the model upright as provided for the best detail on the face.
Support Removal: The fur tips can be sharp; take your time removing supports to avoid snapping any of the decorative points.
Patina Effect: If you print in copper or bronze, you can apply a light teal acrylic wash in the crevices to mimic an aged patina look like in the preview image.