The Savannah Stripe - Stylized Zebra Bust Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete your collection with The Savannah Stripe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
To make those "3D stripes" really stand out, I recommend these settings:
Layer Height: 0.2 mm (Standard) or 0.16 mm (for even smoother transitions on the snout)
Infill Density: 10% - 15%
Infill Pattern: Gyroid (Best for handling the complex curves of the neck and mane)
Perimeters: 3 (Provides enough "meat" for the deep stripe textures)
Supports: Yes (Use Organic/Tree supports. Focus on the chin and the lower parts of the mane for the cleanest look)
Material: PLA. While it looks great in any color, Silk Silver or Galaxy Black can create an incredible effect on these specific textures.
Designer Tips
Support Placement: If you use PrusaSlicer or Bambu Studio, use the "Paint-on supports" tool to only place them under the steepest overhangs of the ears and jaw.
The "Zebra" Look: For a bold artistic look, try printing this with a "Dual-color" or "Rainbow" filament to see the stripes change color as the print grows!