The Savannah Stripe - Stylized Zebra Bust Sculpture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete your collection with The Savannah Stripe.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
To make those "3D stripes" really stand out, I recommend these settings:
Layer Height: 0.2 mm (Standard) or 0.16 mm (for even smoother transitions on the snout)
Infill Density: 10% - 15%
Infill Pattern: Gyroid (Best for handling the complex curves of the neck and mane)
Perimeters: 3 (Provides enough "meat" for the deep stripe textures)
Supports: Yes (Use Organic/Tree supports. Focus on the chin and the lower parts of the mane for the cleanest look)
Material: PLA. While it looks great in any color, Silk Silver or Galaxy Black can create an incredible effect on these specific textures.
Designer Tips
Support Placement: If you use PrusaSlicer or Bambu Studio, use the "Paint-on supports" tool to only place them under the steepest overhangs of the ears and jaw.
The "Zebra" Look: For a bold artistic look, try printing this with a "Dual-color" or "Rainbow" filament to see the stripes change color as the print grows!