Qidi Plus 4 Extruder Feed Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Little piece that is below the extruder drives the guides the filament in to the nozzle
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I lost the Little piece that goes into the extruder for the Qidi Plus 4 that feed the filament into the nozzle. I made one out of PTEG and it worked awesome also did one out of PETG-CF an ABS-GF. they all worked great. I believe someone could make one out of PLA-GF also but might not handle the heat.
If you lost the original you can feed it thru the extruder drives and into the nozzle, manually then start this print, this is a bit of a pin but it is possible.
you will also need a couple of 2pc 2x6 socket head self tapping cap screws if you happen to lose those also