HSW AT&T BGW320-500 Fiber Modem Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb Storage Wall Mount for AT&T Fiber Modem BGW320-500! Print at a 45 degree angle in 2 parts!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Honeycomb Storage Wall mount for your AT&T BGW320-500 fiber modem! I took inspiration from Plexi's earlier design and mimicked it while adapting it to Honeycomb Storage Wall.
Each part is designed to be printed at a 45 degree angle to maintain higher strength over time while holding a warm modem. Button head or socket cap M3 screws (8-12mm) are recommended to attach to Honeycomb Storage Wall M3 inserts and I accounted for a lot of different options for HSW inserts. I attached the bottom mount with 3x dual hex inserts and the top with a single dual insert and it is very secure.
Printed with Sunlu Matte Orange and Purple PLA.