Ioniq 6 Charger Hook Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook for a phone charger to clip under the center console lid in a Hyundai Ioniq 6
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a clip to sit under the lid of the center console in a Hyundai Ioniq 6. It's to hold the end of a phone charger so you don't have to leave the end sitting on the ground. It may work in other similar models (and may not work on years other than the 2024 or trims other than the SE). The cable should fit into the slot and then the head should fit into the hook so that it can't fall out. It's possible that wider cables or heads could cause problems, I included the STEP file if you need to update it. Also, here's the OnShape link so you can copy and make updates there if you use it: https://cad.onshape.com/documents/216d98ebb38c918ebd98cccb/w/dae9dfe5c4f08a3780ce9b46/e/de356a1f1ba45e149ef83881
I'd recommend printing it on it's side for strength reasons with supports for the slot.