SenseCAP P1 Pro – Pole Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount the SenseCAP P1 Pro extension arm on a 1-inch pole using zip ties.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Seeed Studio SenseCAP P1 Pro comes with a metal extension mount, but the stock pole clamp only fits poles 70–100mm in diameter. If you're mounting on a standard 1-inch (25.4mm) pipe or mast, this adapter bridges the gap.
This print replaces the pole-clamping portion of the included extension mount, letting you reuse the rest of the hardware (the extension arm, tilt adjustment, and all original hardware) while clamping securely to a 1-inch pole.
What you need:
Seeed Studio SenseCAP P1 Pro (stock extension mount hardware retained)
1-inch (25.4mm) diameter pole or pipe
Existing bolts work fine if you can get the washers off. With the washers on, they are just a little too short to fit through and catch the nut.
Zip ties
Optional: Rubber to prevent slipping on the pole
Also available on MakerWorld: https://makerworld.com/en/models/2688612-sensecap-p1-pro-pole-mount-adapter