SenseCAP P1 Pro – Pole Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount the SenseCAP P1 Pro extension arm on a 1-inch pole using zip ties.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The Seeed Studio SenseCAP P1 Pro comes with a metal extension mount, but the stock pole clamp only fits poles 70–100mm in diameter. If you're mounting on a standard 1-inch (25.4mm) pipe or mast, this adapter bridges the gap.
This print replaces the pole-clamping portion of the included extension mount, letting you reuse the rest of the hardware (the extension arm, tilt adjustment, and all original hardware) while clamping securely to a 1-inch pole.
What you need:
Seeed Studio SenseCAP P1 Pro (stock extension mount hardware retained)
1-inch (25.4mm) diameter pole or pipe
Existing bolts work fine if you can get the washers off. With the washers on, they are just a little too short to fit through and catch the nut.
Zip ties
Optional: Rubber to prevent slipping on the pole
Also available on MakerWorld: https://makerworld.com/en/models/2688612-sensecap-p1-pro-pole-mount-adapter