Small house for outdoor thermometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model protects Acurite thermometer transmitters from the elements, but allows for ventilation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This housing is sized for Acurite outdoor temperature transmitters. I printed this in white ASA for UV resistance and minimal solar heating. The module is held inside by a 50mm M3 screw inserted in the base. An M3 heat set insert is required for this. Alternatively a longer screw and nut can be used. The photos show version 1 where I used a 3mm dia brass threaded rod across the long side of the housing. The STL is for version 2 that accepts a 50mm SS screw across the narrow side. The housing is designed to be hung up.