Routing Template for Telecaster-style Control Cavity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Control cavity routing template for installing a standard Telecaster-style control plate on a guitar body.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is used to position and route the control cavity when mounting a standard Telecaster-style control plate on a guitar body.
The holes near the corners reduce pulling tension during the print. This minimizes warping after the part is removed from the build plate, and reduces the risk of lifting off the build plate during the print when using materials that tend to warp.
If you also need a cavity routing template for a vintage Telecaster-style bridge pickup, please see my other model: Pickup Routing Template for Vintage Tele-style Bridge
Design Features:
No supports required.
Alignment notches allow precise placement on the guitar body.
Designed to minimize warping
Printing Notes:
Print with 0.2mm layer height, structural, with 3 perimeters and 15% gyroid infill.
The material used should be rigid (stiff) with minimal warping to provide a stable, flat surface for the router; I used PC-CF, and it worked great. PLA will work if you don’t plan to use the template many times, but ensure that your router bit uses a ball-bearing follower rather than a bushing or bare-shaft to prevent conducted heat from ruining the template.
Please DO NOT use the .bgcode file that has been provided (always slice your own files for your specific printer, filament, environment, etc.). The file was only included to provide a reference for approximate print time.