Pressure washer hose holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50 ft Hose Holder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
50 ft Hose Holder
A simple and clean design made to hold a 50 ft hose with good strength and stability.
Printed using PETG, but for outdoor use, ASA is a better choice due to its resistance to sunlight and weather conditions.
Infill should be adjusted based on the hose weight. For heavier hoses, 100% infill is recommended to ensure maximum rigidity.
The design focuses on an elegant look, which may require a higher amount of filament to achieve the needed strength.
Designed to be mounted using two M4 screws.
For best results, print the model on either the right or left side to reduce support material and improve strength.