Sovol SV06+ Enclosure Mod (SKR 3 Non-EZ Support + External MOSFET Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure modification for Sovol SV06+ with added support for BTT SKR 3 (non-EZ) and mounting space for MOSFET-switch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom enclosure modification for the Sovol SV06+.
The model extends the original housing to support additional hardware and improved modularity.
It was designed with a focus on practical usability, clean integration, and easy printing.
Changes / Features:
- Added support for the BTT SKR 3 (non-EZ variant)
- Dedicated mounting space for an external MOSFET module
- Improved internal layout for cleaner cable routing
- Designed to fit into the existing SV06+ housing concept
The MOSFET compartment is sized for common external modules such as:
https://www.amazon.de/gp/product/B075FT6N6M
Printing:
- No special requirements, standard FDM printing works well
- PETG recommended for better thermal and mechanical stability
- PLA is possible for non-critical environments
Suggested settings:
- Layer height: 0.2 mm
- Walls: ≥3 perimeters
- Infill: 20–30%
Notes:
- Minor post-processing (e.g. hole cleanup) may be required depending on printer calibration
- Hardware (screws, inserts, MOSFET, board) not included
- Verify clearances before final installation
Source:
The original design was created in Blender. A printable mesh version is included.
If you make improvements or adaptations, feel free to share them.
