Shop Vac Hose Clip (2.5")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall/Workbench mountable clips to stow your shop vac hose
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got tired of my shop vac hose flopping around, so here's a hose clip you can mount to the side of your workbench (or wall) and keep everything nice and tidy.
I've printed these in ABS, but I've been curious about a high durometer TPU. I don't know how well PLA would hold up to repeated flexing, but PETG might be fine! I'd recommend enough perimeters at your line width to ensure that the "clip arms" are fully built from perimeters.
There's two versions:
"No Supports Needed"
As in the name, no supports are needed :)
I used this one for quite a while, but the sharper corners started to bother me.
Rather than round them off with sandpaper, I offer you...
"Supports Needed"
This one is all nice and rounded and swoopy, but it needs supports.
Now that I have a dual nozzle printer, I figured why not try this out!
Feels nice and printed great with support.
You'll need 2x #8 flat head screws to affix these clips to your workbench or wall.