USS Drybox Sleeve for Atomic Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USS Drybox Sleeve for Atomic Spools which lowers friction by keeping the spool from resting/rubbing on the bottom
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
This was inspired heavily by Timetraveler's creation. Their version didn't include a known working solution for Atomic Filament spools and so I decided to make my own. The idea is the same - adding a slippery sleeve for the spool to roll on which also lifts it up off the bottom of the drybox. It's a compromise in design but does seem to work well in my testing so far. I don't think it will work well enough for TPU though.
Also the USS itself only supports the newer Atomic spools The older ones do not fit in the drybox at all.
This is literally just a CSG model with a cylinder minus a cylinder but I've hopefully saved you the work of having to measure things.
Print this in PETG for the lowest friction.