Mini Shelf in a shelf (shelf organser), Open Source, FreeCAD parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mini shelf you can install in a shelf as a shelf organizer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A parametric mini-shelf designed to be placed within existing shelving as an organizer.
Features
Fully Parametric: Easily customize the height, width, depth, and the number of shelves.
Expandable Design: For widths exceeding your build plate, boards can be printed in two parts and joined using 3D-printed dowel pins.
Material-Efficient: The combination of thin plates and structural ribs reduces the plastic footprint and shortens print time without sacrificing rigidity.
Adaptive Reinforcement: The number of ribs and joints scales automatically with the depth to maintain optimal rigidity.
Shelf board
If your required board size fits on your 3D printer's build plate, use "Board1".
If you need a wider board than your 3D printer's build plate, use "Board2", print it twice, insert "Pin", and glue it in place.
Assembly
If you split a board, insert Pins into the board's holes, then glue the two boards together.
Insert the boards into the side panel from the smooth-surface side.
Fit the dovetail section of the board into the side panel. It's a bit of a tight fit, so use pliers to push it in if necessary.
Insert the locking insert into each hole of the side panels from the outside.
Customisation
You can adjust the model's dimensions to fit your needs.
parameter | description | default |
|---|---|---|
VarSet.Width | width of the shelf | 210mm |
VarSet.Depth | depth of the shelf | 240mm |
VarSet.Height | height of the shelf | 200mm |
VarSet.NumberOfShelves | number of the shelves | 3 |
Parts
name | internal name | description | number of prints | number of prints If the size does not fit on the build plate |
|---|---|---|---|---|
Board1 | Body004 | shelf board, one single board | 3 (shelves) | 0 |
Board2 | Body | splitted shelf board | 0 | 6 = 3 (shelves) x 2 |
SidePanel | Body001 | side panel | 2 (right and left) | 2 (right and left) |
Pin | Body002 | pin as a dowel | 0 | 3 (shelves) x 5* |
LockingInsert | Body003 | locking insert | 36 = 3 (shelves) x 6* x 2 (left/right) | 36 = 3 (shelves) x 6 x 2 (left/right) |
In my case, I need a shelf measuring 210mm in width, 240mm in depth, and 195mm in height. I'm using a Prusa Mark 4S, which has a 250mm x 210mm build plate. Therefore, I can print a shelf board without splitting it. I need a 3-tier shelf.
The following is the number of prints you need for several cases.
W 210mm x D 240mm x H 195mm, 3-tier (attached 3mf files)
No need to split the board.
3 x "Board1"
0 x "Board2"
2 x "SidePanel" (left and right)
0 x "Pin"
36 x "LockingInsert" (3 shelves x 2 (left/right) x 6
W 300mm x D 120mm x H 200mm, 2-tier
Need to split the board.
0 x "Board1"
4 x "Board2" (2 shelves x 2)
2 x "SidePanel" (left and right)
4 x "Pin" (2 shelves x 2)
12 x "LockingInsert" (2 shelves x 2 (left/right) x 3