GoPro RC Car mount for Tamiya and Xray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice quick mount for a GoPro, designed to fit over the body posts and to be held in place with standard body clips.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 308
- Wydruki
- 1
- Wyświetlenia
- 1267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a little GoPro mount I designed to mount onto the body posts of an RC car. Included are two versions:
- Tamiya - designed to be mounted on a TT01 or TT02 chassis, it might fit others. The holes are 5.5mm diameter and spaced at 65mm. The GoPro ends up about 5mm off centre but by doing that it means there is enough clearance for the body clip to fit.
- Xray - designed for an Xray T4, again this might fit others. The holes are 6mm diameter and spaced at 100mm.
Ideally you want the holes to be a good snug fit on the body post, any excess play results in the camera moving backwards and forward under acceleration and breaking.
Prints without supports, in the orientation as it would be mounted on the car.
Sample in the photos is printed with Prusament Galaxy black.
When I get to the track I'll upload a little video, works nicely with the GoPro HyperSmooth setting enabled!
Quick Timelapse of them printing: