1 / 2
Eibos Cyclopes Drier Fan Converter (minus a couple overhangs)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minor remix of great original. Removed a couple overhangs/bridges to get it to print cleaner for me in PolyMax PC.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
Two places were giving me trouble printing cleanly in PolyMax PC.
- The rounded overhangs near the heater screw holes. I suppose I could have just printed with supports, but I opted instead to extend the problematic overhangs down to the bed. This sacrifices just a little fan cross section, but not much.
- The bridging on the inside related to the wire channel wasn't bridging nicely, so I put a nicely-printable overhang there instead.
To be clear, I could have used the print of kcwu's model (maybe with a little scraping to clean up the screw holes), and kcwu's model does provide slightly more fan cross section.
I wish there were a way to attach a slightly-modified model to a “make”, since that's really all this is.