RR V-Core 4 500W Chamber Heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aluminum plate to mount 500W chamber heater, fans, duct.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Mount + duct for mounting 500W heater.
I ended up using small shims between heater + hex standoffs for more clearance. Heater was grounded on the thermal fuse stand-off through a wagoo. Temp sensor was drilled through heater, skimming the fins lightly. Whole assembly is easily removable with 2 screws for maintenance. I printed the duct in PAHT-CF and put 300+hrs on it sofar, no issues. The bottom of the duct was tapped (8 holes) to mount through fan holes with M3 screws.
Heater: https://a.co/d/00dQmDBV
Standoffs: McMaster 94868A016
Fans: 2x Deltas PFB0512EHF
Screws: M6 to 3030 frame, M3 to mount fans to plate/duct, M4 to hold wagoo holder