RR V-Core 4 500W Chamber Heater
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aluminum plate to mount 500W chamber heater, fans, duct.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Mount + duct for mounting 500W heater.
I ended up using small shims between heater + hex standoffs for more clearance. Heater was grounded on the thermal fuse stand-off through a wagoo. Temp sensor was drilled through heater, skimming the fins lightly. Whole assembly is easily removable with 2 screws for maintenance. I printed the duct in PAHT-CF and put 300+hrs on it sofar, no issues. The bottom of the duct was tapped (8 holes) to mount through fan holes with M3 screws.
Heater: https://a.co/d/00dQmDBV
Standoffs: McMaster 94868A016
Fans: 2x Deltas PFB0512EHF
Screws: M6 to 3030 frame, M3 to mount fans to plate/duct, M4 to hold wagoo holder