1 / 2
BNC Plug Sleeve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The BNC ports on the ZOYI ZT-70xS are very deeply recessed, which makes it all but impossible to connect standard probes without using pliers. This sleeve extends the locking ring of the plug above the edge of the port recess and also provides improved leverage.
My plugs have an OD of ~14.4mm. You might have to scale the model slightly to make it fit your plugs and clear the edges of the case. Make sure to have a very tight fit. Ideally, make it so tight that it needs to be slightly warm to slide over the plug.