Liczymy pasujące modele…
This is a fully functional (and roughly 1/4 scale) model of a BNCO Model 110, it is overall very simple to build and works and sounds great! HARDWARE PARTS: motor shaft coupler You also need wire, but you can use whatever you have for it…
PETG recommended but PLA should be fine for smaller antennas. Very tight fit.
This is a remix of the original AX1 antenna clamp bracket as well as a generic molle mount. I took only the l bracket from the clamp mount and put it into blender and paired it with the generic molle mount so now you can have a man pack…
This BNC cap protects connectors from dust and damage, including an integrated loop for attaching a lanyard or cable tie, preventing loss when the cap is removed. Ideal for handheld radios, RF equipment, and test gear. There is a version…
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
This is a fully functional (and roughly 1/4 scale) model of a BNCO Model 110, it is overall very simple to build and works and sounds great! HARDWARE PARTS: motor shaft coupler You also need wire, but you can use whatever you have for it…
Replacement interior cover plate on an AC prep vent on a Hiker Trailer, just add a bnc panel mount extension cable. should be a drop in replacement for the factory cover plate.
Tool for installing and removing BNC cables on high density panels. Changes from original: Reduced length from 130mm to 80mm Adjusted profile to fit around right-angled BNC plugs Print in PLA or PETG. Use a generous brim. Supports…
Female BNC Port Dust Cap This is a dust cap for female BNC ports with a loop to retain the cap on the BNC port when the port is in use. This model should be printed out of a flex filament like TPU. Variants One model has a cylinder…
TPU adapter for Baofeng radios can also be printed in other materials Top and bottom adapters
Use your ZT-703S or ZT-DQ02 with backcover in the rugged case. OpenSCAD-file is included. Copy the originbal bottom inlay file in the OpenSCAD folder and rename to bottom.stl Enjoy!
Allows to use BNC connectors with Retevis RT3S and protects SMA connector from wearing out (SMA connectors have limited number of connection cycles). Printed from PETG. No supports needed.
Overview The Analog Discovery 2 from Digilent is a handy tool for simple electronic experimentation offering a full digital + analog lab in your pocket. Digilent offers a BNC Adapter Board for use with more traditional test probes but is…
A spacer for BNC/SMA adapters to improve the look. Sized for use with a Nagoya NA-771, but will likely work with other antennas.
[Simple Attenuator Box] with 5 stage, for BNC connectors very useful for Osciloscope, Fox Hunting, Audio Tweaking/Freaking, Ham Radio… i plan on using Dymo tape on the face to mark the attenuation values. Material: 2X BNC connector 5X set…
This is a simple cover for cables that can't be directly run behind the NTD unit but want to be hidden away into the backing wall/mounting plate. Pause the print just before the internal holes are closed up to add 2x 5mm*1.7mm stacked…
A little bracket to mount a BNC Bulkhead connector under the shelf of a workbench. Black PTEG. Mounting holes designed for Flathead #6x1 in Wood Screws.
This is a work in progress to develop a temporary antenna mount for when I'm operating within my car (not necessarily while driving). I don't expect it to withstand wind pressure at highway speeds, but perhaps in the future with…
Just a Dust Cover Remixed for the Signal Generator to have a snug fit
I included the .scad-file so you can modify or add upgrades yourself if you like. It is drawn from scratch, but inspired by some other designs from the web. Use some M3 screws with about 6 to 12mm length to secure the whole assembly.…
Manpack Rail System for RT95/AT-778UV – 3D Printable File Hey everyone, I’m excited to share my latest 3D design—the Manpack Rail System for the RT95/AT-778UV ! As a passionate Ham radio operator and off-roading enthusiast , I wanted a…
A grip for the BNC adapter for Motorola radios so that its easier to fit and remove. Slips over the BNC test plug.
Press this lever on the knurled part of a BNC connector. If the connectors are very tightly packed you can put the levers on backwards so the lever arms clear each other when operated.
A small frame for a loop antenna made from RG8 coax. Based on this video's dimensions https://www.youtube.com/watch?v=Ivr9VbSgjUU , just with BNC connectors. The frame is to support it since RG8 is quite thin and flimsy. The loop is…
EFHW antenna base. 4mm screw holes. 6mm support holes Fits this toroid: https://www.amazon.com/dp/B084LVGZ9Q Has optional ground connection hole and counterpoise hole. My personal design uses a counterpoise and I DO NOT connect it to…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection and audio speaker cable. Links Audio Jacks - https://www.amazon.com/dp/B0C9MDDLNG?ref=fed_asin_title BNC Jacks -…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection. Links BNC Jacks - https://www.amazon.com/dp/B08139D4XS?ref=fed_asin_title Related Models Icom IC-2350H Cage -…
I designed for my ICOM 705 this bracket, for solid antenna holding. Used material was PETG.
PETG recommended but PLA should be fine for smaller antennas. Very tight fit.
No Support…just print it :-) Two alternatives… use what you like.
It spreads the tension of big/heavy antennas (W100RX2 added since its a great antenna and i have it now) away from the SMA onto the case. I got inspired by https://www.reddit.com/r/hackrf/comments/1l9c72m/hackrf_h4m_antenna_mod/ .
This is a remix of the original AX1 antenna clamp bracket as well as a generic molle mount. I took only the l bracket from the clamp mount and put it into blender and paired it with the generic molle mount so now you can have a man pack…
I was installing a new antenna distributor in a mixing/audio rack and the stock location of the BNC bulkhead adapters would put the antennas in a far from ideal position. Mixing with your hands in-between two antennas would be terrible…
RF Coax Adapter Bins for the Gridfinity system consisting of PL259-, SO239- and BNC-base connectors for Amateur Radio. Each bin type can house 5 coax adapters.
1x2x4 for BNC male and 1x2x3 for BNC female, both with 4 slots.
This is a JVC IF-C01COMG card cover for DT-V1710CG, DT-V1910CG, TM-H1950CG and TM-H1750CG, probably would work on the 15" series too. Is compatible only with aftermarket cards built using the IF-C01COMG Clone board THT Full size designed…
Oscilloscope BNC Connector cover Protect Oscilloscope BNC connectors from rusting/environmental factors
I found some others online but each had it's own issues (too thin walled, no shoulder to hold connector well, etc). I made mine to correct for those in my use. I am posting them in case it helps anyone else. Print comes in 3 lengths so…
You will need a piece of standard 3M VHB tape. This tape is typically about 1mm thick. Simply stick the tape to the bottom of the finished print, and cut out the hole. Then check that your included MCX-to-BNC connector fits snugly into…
the angled PL to BNC adaptor i got was quite sharpcornered so I needed something to protect my backpack if I wantet to have the adapter always mountet on my radio. The “Cube” on my adaptor measures 14 x 14 x 14,2 mm, so I designed this…
This mount goes along with this project: https://oshpark.com/shared_projects/GYx5pdjH https://github.com/skumlos/if-c01comg-clone The board is a reverse engineered Component/RGB board for JVC Panasonic and Ikagami broadcast monitors. All…
The Harris XG-100P has a recessed SMA Female antenna connector. Only Harris antennas specific to the XG-100P will fit elegantly. Using a widely available SMA Male to BNC Female connector, this spacer gives the support and stability needed…
This BNC cap protects connectors from dust and damage, including an integrated loop for attaching a lanyard or cable tie, preventing loss when the cap is removed. Ideal for handheld radios, RF equipment, and test gear. There is a version…
I needed a HDBNC tool but didn't want to pay for one at $150 a pop. So, designed & printed my own! Not an engineer so feel free to remix this & make it better! I used glow-in-the-dark PETG for this specific one. But it would also work…
Instruction Manual and Video Available Project Manual A Project Manual has been created that takes you step by step through the process of converting the Estes Green Eggs model rocket in to our tribute of the Scrambler rocket. The manual…
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
I love the MicroPA 100 but I hate the SO-239/UHF connectors, so this small print allows you to swap them out for standard BNC type connectors. The socket for the BNC is slightly off center on purpose so that it visually looks centered on…
BNC jack hook. You can use it to hook oscilloscope probe extension cables to something without tripping and breaking that something I think this internal diameter is good for everyone
A dock for the Retrotink 5X-Pro that passively breaks out the SCART jack into individual BNC connectors for RGBs or composite video signals, besides stereo audio. !!!!!WARNING FIRST!!!!! Retrotink 5X-Pro DOES NOT support TTL-level sync…
Sister project of my GBS Control Case for 8220: https://www.thingiverse.com/thing:4666227 Compatible with two sizes of the ESP8266 WiFi modules: 48 x 25mm 58 x 31mm Please choose the corresponding socket when you print. Project is put…
My version of GBS Control case for GBS 8200 and two sizes of ESP8266 modules, plus RGBS BNC connectors. The two sizes of the ESP8266 module supported are: 48 x 25mm 58 x 31mm Please choose the corresponding one when you print. Project is…
Added cable relief, zip tie holes and suspension hole to the original design
A floating BNC antenna holder. Print both parts, screw the wall plate to the wall and slide on the antenna holder after installing 5 BNC connectors.
There are two versions of the model presented. One is a basic rework mount that allows a F/F BNC bulkhead mount be installed in an existing 16mm (5/8") panel opening. This might be the case if replacing SO-239 bulkhead fittings with BNC.…
I wanted to use a camera tripod to mount an external antenna for Field Day use, but the 1/4-20 threads on tripods are too short to attach a standard nut. By using a 1/4-20 Coupling Nut I was able to 3D print these mounts, and the design…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
This is essentially a Female BNC Connector that has an outer ring to protect the end of the connector from being crushed. The print on the picture has our company logo on it, but i've removed it from the model files.
I just got this radio with this generic SMA-M to BNC-F that could potentially put stress on the radio connector. It's a straight design to enclose the adapter and fit tightly to the FT-60. A bit too tight on the knurled part. FreeCAD file…
Replacement interior cover plate on an AC prep vent on a Hiker Trailer, just add a bnc panel mount extension cable. should be a drop in replacement for the factory cover plate.
Tool for installing and removing BNC cables on high density panels. Changes from original: Reduced length from 130mm to 80mm Adjusted profile to fit around right-angled BNC plugs Print in PLA or PETG. Use a generous brim. Supports…
Female BNC Port Dust Cap This is a dust cap for female BNC ports with a loop to retain the cap on the BNC port when the port is in use. This model should be printed out of a flex filament like TPU. Variants One model has a cylinder…
TPU adapter for Baofeng radios can also be printed in other materials Top and bottom adapters
Adds flush-mount BNC and SMA (optional) connectors to @stokey3D's design. BOM 1x BNC bulkhead ( amazon.com ) 1x SMA bulkhead ( amazon.com ) 1x 10,000mAh LiPo battery ( amazon.com ) 4x M3x10 (BHCS-preferred) 1x RAK19007 baseboard Designed…
Semi-enclosed case for the combination of Digilent Analog Discovery 3 and BNC Adapter board.
Disclaimer: I have no affiliation with Adam Kimmerly (K6ARK). I just like his stuff, and his kits were out of stock, so I made this. You should check out his stuff if you haven't. For this transformer, you'll need: FT50-43 Ferrite Toroid…
The BNC ports on the ZOYI ZT-70xS are very deeply recessed, which makes it all but impossible to connect standard probes without using pliers. This sleeve extends the locking ring of the plug above the edge of the port recess and also…
Designed to help reduce the risk of electric shock when working with high-voltage circuits using an oscilloscope. It provides an isolated layer for your BNC connectors for safety during measurements.Also helps keep the BNC connectors dust…
I got this radio that I wanted to use with BNC antennas. The gap between the adapter and the radio could potentially lead stress on the radio connector. This is intended to limit this. It fits tightly in the FT-60 enclosure to distribute…
Custom 3D-printable coax cable stripping tool designed specifically for preparing cables for the Neutrik NBNC75BLP9 connector. The tool uses 3 small blade segments broken off from a standard utility knife. Each blade is positioned at a…
I looked at several BNC dust caps on Printables. I wanted a cap that would click into position and not rattle off. I didn't find any (maybe I missed one). So I designed my own. After lots of trial and error, here it is. There are internal…
The monitors for film/tv sometimes have BNC ports that are difficult to reach. I added some extra grip to the cap so it is easier to grab. Printed on Prusa Core One with .2mm layer height. No supports needed. *Edit 26/7/2026 *: Added a…
Remix o cjnaz's "BNC connector dust cap that clicks into place and stays there". I just added a knurling for a better grip with https://bumpmesh.com , here were my settings: height=0.3 inverted scale=0.33
A BNC connector dust cap. Openscad source file included. The bayonet slot of this cap design has a cavity at the end to hold it better in place. I am marking it as 'customizable' even though the openscad code requires parameters cleanup…
A simple dipole center structure with a hole for a BNC panel mount connector and space for a T80 torroid 1:1 balun. For field use. Category: Electronics
Timesaver holes already sized for BNC panel mount connectors, both round and with the flat side. Save them to your virtual toolbox and you can just load them and use as holes. Saves the time of remembering or figuring out the dimensions…
It's easy to buy an adapter that's BNC (F) to 3.5 mm (M) but I've only found the other way in cable form, so I made my own. It could be used to adapt BNC jacks to accept 3.5 mm patch cables as used in modular synthesizers, or to connect a…
modifications: removed the part holding the Analog Discovery 2, so this case sits nicely in the box on its own. made the side with unprotected pins 3mm wider so they don't stick out and risk getting bent. modelled threads for M3x8 screws…
Typical use case would be with a Extron Crosspoint or daisy-chain from the output of a PVM, TTL sync only. Connections are turned 90° so they are facing backwards, creating a simple and clean cable management path in your entertainment…
This is a Complete set of Piece in order to build a Yagi-Uda antenna that is very lightweight and portable. complete with a pistol grip handle and separate piece for the BNC connector [not pictured]. there is even a cut-out for your…
Adam, K6ARK has designed an ultra-compact matching unit kit for portable Ham radio operation. One of his winder design ( https://www.thingiverse.com/thing:5385215 ) integrates a clip for a Male BNC connector. Seeing that, I designed an…
Print at 0.2 layer height. it should just screw on without much effort be careful not to force it.
This is the next revision of the K6ARK antenna winder for the female BNC connector version. Adam showed off his new design in a livestream and I used that to create this version. This was designed using the FreeCAD Link Stage Branch. I…
This remix adds a clip for a Male BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio operations,…
This remix adds a clip for a Female BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio…
This is a small brace to support the SMA to BNC adapter from Signalstuff. Adapter can be found here: https://signalstuff.com/product/smam-to-bnc-adapter/ This is designed for the (tr)uSDX by DL2MAN and PE1NNZ. It simply slips over the SMA…
A cap for a BNC female connector. I've remixed it to add a retaining ring. Credit to ItzKCase for the original model, which can be found here: https://www.thingiverse.com/thing:5276197 Printed in TPU.
Female BNC Connector, for use as a plug or as a way to store antennas or cables.
I needed to tighten BNC connectors so they wouldn't rotate when connecting a cable. This tool allows you to keep the female connector from rotating while you fasten the nut on the other side, and prevents any damage to the connector (vs…
I screw a lot of BNC connectors at work. Usually I screwed them in with pliers, but that sometimes scratched the BNC. So I made this.
The sleeve is designed both guy the mast and attach antenna wires. The sleeve sticks to the DXWire mini GFK mast (10m) at around 5m, so the vertical λ/4 part of the antenna fits to the aligns part of the mast. The rim is used to attach…
This model is a cutting guide to help you dress coaxial radio cable for a crimp-on BNC connector. It is for Amphenol part number 112533, which suits RG-8x and LMR-240 50 ohm cable. As shown in the attached picture, Amphenol specifies…
This is a shroud that covers cover the exposed metal on BNC connectors to prevent shorting to anything on your bench. You can also print them in different colours to help identify your probes or cables. Different brands of connectors have…
BNC_50AD Nose cone (Used on the Fliskits Stingray)
For use with low-weight QRP antennas only (MFJ-1899T, Elecraft AX1/AX2). Works well with PLA. To attach, unscrew half of clamp opposite of handle, slide onto metal bar. It will require some effort, but the snug fit helps keep the antenna…
