BNC Antenna Adapter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Are your antennas in your way or just not in an ideal location? 📡 Now you put em where YOU want them! 🤓
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was installing a new antenna distributor in a mixing/audio rack and the stock location of the BNC bulkhead adapters would put the antennas in a far from ideal position. Mixing with your hands in-between two antennas would be terrible and obstructing the antennas would almost defeat the purpose of the distributor. So I made these mounts to relocate them at the top and rear of the rack (facing the stage)! Works wonderfully and stows away very neatly 👌
These mounts were modeled using adapters from Shure but I'm “shure” they would work with other brands… 🤓
I printed mine in the photos with Bambulab PETG-CF but standard PETG would do just fine in a roadcase like mine. Definitely would not use PLA. The mounts would sag overtime and from the heat.
I hope you find this print useful and please post your makes!
Material: PETG or stronger / more durable material.
Perimeters/Walls: 4 for more strength all-over - especially for the screw holes.
Infill: 15% Cubic
Brim: Not Necessary
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco