BNC Antenna Adapter Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Are your antennas in your way or just not in an ideal location? 📡 Now you put em where YOU want them! 🤓
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 69
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was installing a new antenna distributor in a mixing/audio rack and the stock location of the BNC bulkhead adapters would put the antennas in a far from ideal position. Mixing with your hands in-between two antennas would be terrible and obstructing the antennas would almost defeat the purpose of the distributor. So I made these mounts to relocate them at the top and rear of the rack (facing the stage)! Works wonderfully and stows away very neatly 👌
These mounts were modeled using adapters from Shure but I'm “shure” they would work with other brands… 🤓
I printed mine in the photos with Bambulab PETG-CF but standard PETG would do just fine in a roadcase like mine. Definitely would not use PLA. The mounts would sag overtime and from the heat.
I hope you find this print useful and please post your makes!
Material: PETG or stronger / more durable material.
Perimeters/Walls: 4 for more strength all-over - especially for the screw holes.
Infill: 15% Cubic
Brim: Not Necessary
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco