Female BNC Port Dust Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dust cover for female BNC ports. Should be printed out of a flexible material.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Female BNC Port Dust Cap
This is a dust cap for female BNC ports with a loop to retain the cap on the BNC port when the port is in use. This model should be printed out of a flex filament like TPU.
Variants
One model has a cylinder support included to prevent sagging when printing the bridges on the top. If you're not worried about the sagging (or you're confident your printer is awesome enough), you can use the version without the support. You may also want the version without the modeled support if you intend on adding your own supports.
Recommended Settings
Print at 0.15 mm layer height. If using the model with a support, use 5% or less infill. The infill doesn't matter aside from the support. I designed this model and printed it with 95A Shore hardness TPU. For the print orientation, print it as presented: loop-side down. No supports should be needed if using the model that has a support included. YMMV otherwise.
How It Was Made
This was made entirely using the free and open source FreeCAD 1.1.0. STEP files for the versions with and without the support are included for further modifications/remixes.