Portable mini usb air compressor (for inflatable bed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I am travelling with motorcycle I have no room for extra things. I was always upset from blowing this inflatable…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 1313
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
When I am travelling with motorcycle I have no room for extra things. I was always upset from blowing this inflatable bed. Often after some beers.... I was dizzy :). Now I can take this and enjoy blowing ;)
Extra material
1 x DC motor, it's from some toy, probably is only 3V, but it can run at 5V from USB, at least for some time until the bed is ready :)
1 x Switch
7 x Screew
1 x old USB cable
1 x Capacitator 500uF
1 x Capacitator 104
Be sure, that your USB (powerbank) can handle the motor current. My consumes about 1.3A.
It's remix of https://www.thingiverse.com/thing:209797
Custom Section
Category: 3D Printing