Low Profile Bracket For MegaRAID SAS 9380-8e
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bracket for 9380-8e. Woohoo.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a remix of the bracket by Rolf Bakker to fit the 9380-8e and fit normal low profile PCIe card mounts. It was good enough to fit my case, but the CAD file is included in case you need to adjust it. You will need screws, washers and nuts. I used M2.5x6 screw, nuts and washers but M2 probably works.
I bought this card refurbished, as it is a great little performer and when used with a refurb SAS expander can be plugged into a lot of cheap SATA drives! However, it came with a full-height bracket which does not fit my device.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨