Chamfered button lock picatinny attachment for folding stock - fits Xshot Fury X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a chamfer to the top and bottom edges of the button lock so that it could be used in slightly tighter spaces.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I originally printed RedCowl's picatinny folding stock so I could attach it to the butt end of a Xshot Fury X using Perry's picatinny rail (https://www.printables.com/model/1180755-x-shot-pro-fury-x-picatinny-stock-point).
However the spacing of the ridges doesn't align well since the body of the Fury X juts out a bit at the back and stops the folding stock mount from sliding in all the way (see second photo). To fix this, I added a 45 degree chamfer at the top and bottom of the button lock piece that mates with the rail. Now the piece sits in the center of the rail and flush against the back.
This is only the button lock part and you will need to refer to RedCowl's original files for the rest of the stock.
Print as oriented with supports for the cantilever regions.
If you're feeling brave, you could try and print with the chamfered edge on the bed at a 45 degree angle without supports. With good bed adhesion or a brim, it might be possible but I haven't tested this.