EXEN/RubberQuads ORCA FULL TPU KIT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Full kit for my ORCA. The best frame ever<3.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
Contains:
- Reinforced front bumper
- O4 pro cam insert for camera modded with the ITS FPV CNC mod. (30 degrees) Note: the little TPU extrusion is meant to go in the second screw hole on the camera. This was the angle is easy to set at 30 degrees. Screwing the top plate on clamps the camera securely in place. it shouldn't move. Extrusion is only meant for one insertion, i recommend printing multiple if you need to reinsert it multiple times.
- Modified fin, made it slightly lighter and added a little extra to the front to protect the camera ND filter.
- RX Front mount
- O4 Pro VTX holder with side mounted antennas
- Cap+TVS and beeper Holder
- Pigtail Lead holder (16AWG) (Original)
- Motor cable combs (Original)
Note: I added a design for the O4 pro with stock antennas mounted at the rear of the quad. I have not actually used this in the build, so some adjustment might be needed. I cannot confirm from experience it is as resilient as the rest, but I suspect it can take a hit:)
UPDATE:
-Cam inserts were not holding cam angle securely enough. Added full mount at 30 degrees
- Hollowed out fin wasnt strong enough. Use Krhom's original design for best ginel fin solution. Also Added a remix from Yeetlab's double fin design (which is in turn also a remix from Grimka FPV) that just looks too sick.