P
Printableshockeyrounds
ELRS antenna vertical mount RP3 RP1 5mm standoff
20mm tall, 5mm hex standoff. elrs rp1 rp3
- Pobrania
- 218
- Polubienia
- 10
- Ocena
- 0
Wyniki wyszukiwania: rp1
Liczymy pasujące modele…
P
Printablesbsprange
Radiomaster RP1 RP3 20mm drone side antenna
Side antenna mount for Radiomaster RP1 or RP3 antenna. Fits onto any 20mm standoff See my other uploads for a front mounted antenna holder. Printed in TPU
- Pobrania
- 215
- Polubienia
- 15
- Ocena
- 0
P
PrintablesCJ Davies
Radiomaster RP1 RP3 ExpressLRS receiver antenna mount
Basic mount for the T style 2.4GHz dipole antenna that comes with the Radiomaster RP1 & RP3 ExpressLRS receivers. This design uses M3 heat set inserts with a hole spacing of 29.5mm & is designed to mount flush against a 3mm thick piece of…
- Pobrania
- 207
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJonathan_Ott
Radiomaster RX-RP1 Receiver V7.1 Case Mount 20mmx20mm
Remix of Radiomaster RX-RP1 Receiver V7 Case Mount 20mmx20mm
- Pobrania
- 162
- Polubienia
- 12
- Ocena
- 5
P
Printablesbullitt168
Radiomaster RP1 Receiver Mount for Volador VX3.5
A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm. I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit…
- Pobrania
- 125
- Polubienia
- 18
- Ocena
- 5
P
PrintablesNC10
Replacement drip tray for the GRP1060B 4 Serving Foreman grill
Sept 2023 Update: Improved Design Now Available Here: https://www.printables.com/model/586801-improved-replacement-drip-tray-for-the-grp1060b-4- Somehow lost the drip tray/catch pan for my 4-serving George Foreman Grill (GRP1060B).…
- Pobrania
- 118
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTim
Radiomaster RP1 V2 - Quadmula Siren SF35 /SF3 - RadioMaster RP1 v2 Mount
Designed this mount for the RadioMaster RP1 V2 ELRS receiver, it is meant for the Quadmula Siren / SF3 / SF35 but will work for any drone with a 3.5mm standoff diameter and 20mm between standoffs. I recommend printing at at least 103%…
- Pobrania
- 100
- Polubienia
- 6
- Ocena
- 0
P
PrintablesWilliam Call
Radiomaster RP1 V2 mount for Quadmula F5 Split
The existing mount I used for the Radiomaster RP1 didn't work for the V2 so I designed a replacement.
- Pobrania
- 97
- Polubienia
- 4
- Ocena
- 0
P
Printablesenriverd
ImpulseRC Apex EVO RP1 ELRS and O3 antennas holder
Piece that holds the antennas for the DJI O3 Air Unit and the RP1 ELRS receiver and keeps them protected from being hit when crashing the drone. The piece has been designed for the ImpulseRC Apex EVO frame, but might work for any drone…
- Pobrania
- 90
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDaniel S
AOS 3.5 dji O3 and Radiomaster RP1 Antenna Mount
AOS 3.5 antenna mount, fits the stock dji O3 antenna and the Radiomaster RP1 ELRS antenna. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: amazon basics TPU grey…
- Pobrania
- 84
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBags
Craftedkwads Freshman Radiomaster RP1 Folding Antenna Mount
Modified the 24mm model below, to fit the Craftedkwads Freshman frame- 25mm mount for Radiomaster RP1 antenna. Printed with TPU, 50% infill, supports on build plate only.
- Pobrania
- 83
- Polubienia
- 6
- Ocena
- 0
P
Printablesbsprange
Radiomaster RP1 RP3 antenna mount
Front antenna mount for Radiomaster RP1 or RP3 antenna. Fits onto an AOS 5/5.5/3.5 chassis. Includes additional channels for lighting wiring and one centered channel for the antenna wire. See my other uploads for a 20mm side mounted…
- Pobrania
- 79
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBrett Crouch
Tiny Trainer v2 Radiomaster RP1 RX and T-Antenna Mount
one piece mounting for both RX and antenna
- Pobrania
- 79
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMadKwad
RP1 antenna folding mount
This folding TPU mount is designed to attach the Radiomaster RP1 antenna onto the standoffs of your kwad. The required standoffs for these mounts should be M3 size with a diameter of 5mm. This design was inspired by @Haku3D, and since I…
- Pobrania
- 61
- Polubienia
- 3
- Ocena
- 0
P
PrintablesL3M4R
L4M4R PNP Canopy for Walksnail 1S V3 VTX board and Radiomaster RP1 RX
Universal Walksnail VTX and RX PNP canopy for multiple frames Use ABS other strong material to print, but works fine even with PLA or PETG (it is your own risk and responsibility). I'm using the same Canopy having VTX and RX for several…
- Pobrania
- 59
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDingusDude
Norp16 Half Size Container
This is a half size container for the Norp16 assortment box. Also branded as Norb16 and Nors16 which is an assortment box for small parts. The boxes that come with it are nice but are still too big for very small screws or for parts you…
- Pobrania
- 56
- Polubienia
- 7
- Ocena
- 5
P
PrintablesNC10
Improved replacement drip tray for the GRP1060B 4 Serving Foreman grill
I somehow how misplaced the drip/grease tray from my 4 serving Foreman grill. Without the drip tray, the Grill is unusable. By design, when frying hamburger or other meat on the grill, hot grease flows safely off the bottom edge of the…
- Pobrania
- 53
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTimo
Kopierring für Makita RP1110 30mm
30mm Kopierring für Makita Oberfräse gedruckt in PLA+ passt und getestet
- Pobrania
- 53
- Polubienia
- 5
- Ocena
- 0
P
Printableskyleireland
Ummagawd Botgrinder Grinderino Antenna Mount - SMA and Radiomaster RP1
Radiomaster RP1 ELRS antenna and an SMA locked antenna mount for Ummagawd Botgrinder Grinderino 3.5" using TPU. YOU MUST USE TPU - The RP1 Antenna and the print bend a little to get it fitting into place. Secure the T antenna last. A…
- Pobrania
- 51
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAndreas Gohr
NORP16 Parts Bin Insert
These inserts can be inserted at the top of the original insert bins, giving you a second layer of storage. They fit the NORP16 parts bin storage boxes from Prosperplast. If you want to modify them you can edit the model at OnShape .
- Pobrania
- 47
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMicah Rogers
DRP1N 40% Keyboard Case
Update 3-14-25 Check out the new version of this case here: https://www.printables.com/model/1229331-drp1n-40-keyboard-case-v4 I created a multi-compatible 40% mechanical keyboard case as an affordable alternative for boards like the JD40…
- Pobrania
- 40
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMindaugas G
Vertical Antenna Mount for RadioMaster RP1 V2 on Quadmula Siren SF35/SF3
This custom 3D-printed mount reorients the RadioMaster RP1 V2 antenna by 90°, positioning it vertically to enhance build cleanliness and signal performance. The vertical alignment aligns with the antenna's optimal radiation pattern,…
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMicah Rogers
DRP1N 40% Keyboard Case - V4
The latest version of the DRP1N keyboard case introduces several enhancements to improve compatibility and user customization: Additional Screw Hole Mounting Points : These provide greater flexibility and stability when assembling various…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSound-Maker
Side Stand Foot / Seitenständerverbreiterung Yamaha FJR1300 A/AE/AS, Ultimate, RP13, (RP23), RP28
Da ich keine passende Seitenständerverbreiterung für die FJR1300 gefunden habe, habe ich mir selbst eine hergestellt. Die Seitenständer-Unterseite ist sehr uneben, nicht gerade, daher muss evtl. etwas Schaumstoff untergelegt werden bei…
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHughD
Express LRS receiver Antenna Mount - RadioMaster RP1 V2
This is an antenna mount for an Express LRS receiver (RadioMaster RP1 V2) that I have on an RC rover I'm playing with. I wanted to print it in PETG and wanted something easy-to-print and suitable for my project. I didn't need support as I…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMaggot3d
Diatone Taycan v4 RP1 Rx mount
Mount for rp1 receiver for Diatone
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMicah Rogers
DRP1N - BM43A Keyboard Case
I had some time and saw someone needed a case for the BM430A, so I put this together. It’s a simple 3D-printed case designed to fit the KPRepublic BM430A, though I haven’t tested it yet. If you print it, let me know how it works!
- Pobrania
- 9
- Polubienia
- 5
- Ocena
- 0
P
Printablesfreejoyclub
Panasonic AK-HRP1000 Desk Link Plate
A simple link plate designed to align and secure multiple Panasonic AK-HRP1000 panels into a clean, unified desktop setup-without modifying your table or rack mounting. This bracket connects units using their existing mounting points,…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesK Han
Hengs Ranghood cover JRP1205B
Hengs Ranghood cover JRP1205B.
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
RP1 rx mount
Radiomaster RP1 rx holder for a 20x20 mount. The receiver is tightened with a zip tie that passes through the two notches. Additionally, there is a hole through the support to allow for the passage of an antenna wire.