1 / 2
Radiomaster RP1 Receiver Mount for Volador VX3.5 — zdjęcie 1
1 / 2

Radiomaster RP1 Receiver Mount for Volador VX3.5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount for the Radiomaster RP1 ELRS Receiver for the Volador VX3.5 FPV Drone

Ocena
5 / 5
Polubienia
18
Pobrania
128
Wydruki
2
Wyświetlenia
1546
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm.
I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit should work as well.

the included cables of the receiver worked best for me when orientating the receiver 180° turned, meaning the antenna plug faces the front and not the back where the antenna itself is mounted, see pictures.

You find more pictures and build details here in my reddit post:
https://www.reddit.com/r/fpv/comments/1jciqwg/volador_vx35_with_dji_o4_lite_build/

Tagi