Ummagawd Botgrinder Grinderino Antenna Mount - SMA and Radiomaster RP1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Antenna mount to fit Radiomaster RP1 or similar along side an SMA locking antenna on the Grinderino 3.5" Drone.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Radiomaster RP1 ELRS antenna and an SMA locked antenna mount for Ummagawd Botgrinder Grinderino 3.5" using TPU.
YOU MUST USE TPU - The RP1 Antenna and the print bend a little to get it fitting into place.
Secure the T antenna last.
A little extra material for the RushFPV Tank Tiny VTX but I decided to zip tie it to the frame still anyway. (zip tie not shown as ran without for a bit)
I used an IPEX to SMA adapter which had locking rings to secure in place the antenna.
You may have to modify depending on VTX so I have provided Fusion360 files along side the STL.
If you modify please submit a remix.
If you use this let me know how it goes! use whatever infill pattern and amount that you think would work best.
I can't remember what I used as I made this print a while back.
This was my first drone build, I actually improved the soldering from the images not too long ago.