1 / 3
Ummagawd Botgrinder Grinderino Antenna Mount - SMA and Radiomaster RP1 — image 1
1 / 3

Ummagawd Botgrinder Grinderino Antenna Mount - SMA and Radiomaster RP1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An Antenna mount to fit Radiomaster RP1 or similar along side an SMA locking antenna on the Grinderino 3.5" Drone.

Rating
0 / 5
Likes
2
Downloads
52
Makes
0
Views
258
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Radiomaster RP1 ELRS antenna and an SMA locked antenna mount for Ummagawd Botgrinder Grinderino 3.5" using TPU.

YOU MUST USE TPU - The RP1 Antenna and the print bend a little to get it fitting into place.
Secure the T antenna last.

A little extra material for the RushFPV Tank Tiny VTX but I decided to zip tie it to the frame still anyway. (zip tie not shown as ran without for a bit)
I used an IPEX to SMA adapter which had locking rings to secure in place the antenna.

You may have to modify depending on VTX so I have provided Fusion360 files along side the STL.
If you modify please submit a remix.

If you use this let me know how it goes! use whatever infill pattern and amount that you think would work best.
I can't remember what I used as I made this print a while back.

This was my first drone build, I actually improved the soldering from the images not too long ago.

Tags