Desiccant Container for Chitu FilaPartner E1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy desiccant container for silica gel beads, maximizing interior space of the Chitu FilaPartner E1.
- Ocena
- 4,5 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 164
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This container holds approximately 21g of silica gel beads and is designed to fit snugly into the corners of the Chitu FilaPartner E1, making full use of the available interior space.
Filling A matching funnel is included in this model, designed to fit precisely onto the container opening for easy and mess-free filling.
Ventilation slots The ventilation slots are 1.8mm wide, which is narrower than the typical bead size of 2–5mm, preventing beads from escaping while allowing sufficient airflow.
Lid No separate lid is needed – the container opening is sealed by the FilaPartner's own cover when closed.
Printing
Placement The container is designed for the back-left and front-right corners. For the remaining two corners, simply mirror the print in your slicer.
Print material The FilaPartner E1 reaches temperatures of up to 70°C, so a heat-resistant filament is strongly recommended. I printed this model with Extrudr GreenTec Pro.
Layer height: 0.25 mm
No Supports
Credits
Inspired by the Silica gel bead (Dry&Dry) desiccant box for the Chitu FilaPartner E1 by @JasonEnglert_817600.