1 / 3
Pin-Modded Tool-Free Z-Axis Belt Tensioner for Voron 2.4 — zdjęcie 1
1 / 3

Pin-Modded Tool-Free Z-Axis Belt Tensioner for Voron 2.4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pin-Modded Tool-Free Z-Axis Belt Tensioner for Voron 2.4 (Adapted from Mammoth-3D)

Ocena
0 / 5
Polubienia
7
Pobrania
18
Wydruki
0
Wyświetlenia
230
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I replaced the shoulder bolts with pins, as these are generally easier to source for modders who are already familiar with tool-free Z mods. In addition, I designed two knob variants: one compatible with square nuts, and another intended for M5 heat-set inserts.

The moving center idler has also been updated to use a 30 mm hex head screw instead of the original M4 countersunk screw.

I have printed all components, but I am still waiting for a few bearings before completing the assembly. For the idler, I am not using a smooth pulley; instead, I am using an F695 and 695 bearing stack, similar to the configuration used in the Monolith gantry (you need 0.5mm shims to make it fit), which also helps reduce the number of unique parts.

  • Pin-modded version (5x30mm Pins)

  • Knob with square nut

  • Knob with M5 heat-set insert

  • Bearing stack (Monolith gantry style) instead of 9 mm smooth idler (2x F695+ 1x 695+2x 5x1mm Shim+4x 5x0.5mm)

Tipp: Be sure to check the fit, Pin-Idler-Centre tend to be looser than Pin-Idler-Bot or Pin-Idler-Top due to printing orientation