1 / 3
Pin-Modded Tool-Free Z-Axis Belt Tensioner for Voron 2.4 — image 1
1 / 3

Pin-Modded Tool-Free Z-Axis Belt Tensioner for Voron 2.4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pin-Modded Tool-Free Z-Axis Belt Tensioner for Voron 2.4 (Adapted from Mammoth-3D)

Rating
0 / 5
Likes
7
Downloads
18
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I replaced the shoulder bolts with pins, as these are generally easier to source for modders who are already familiar with tool-free Z mods. In addition, I designed two knob variants: one compatible with square nuts, and another intended for M5 heat-set inserts.

The moving center idler has also been updated to use a 30 mm hex head screw instead of the original M4 countersunk screw.

I have printed all components, but I am still waiting for a few bearings before completing the assembly. For the idler, I am not using a smooth pulley; instead, I am using an F695 and 695 bearing stack, similar to the configuration used in the Monolith gantry (you need 0.5mm shims to make it fit), which also helps reduce the number of unique parts.

  • Pin-modded version (5x30mm Pins)

  • Knob with square nut

  • Knob with M5 heat-set insert

  • Bearing stack (Monolith gantry style) instead of 9 mm smooth idler (2x F695+ 1x 695+2x 5x1mm Shim+4x 5x0.5mm)

Tipp: Be sure to check the fit, Pin-Idler-Centre tend to be looser than Pin-Idler-Bot or Pin-Idler-Top due to printing orientation