1 / 5
Snapmaker u1 top cover 60L box (59cm x 42cm x 36cm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snapmaker u1 top cover. Using 60L box (59cm x 42cm x 36cm)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Top cover for the Snapmaker U1 3D printer. A 60L container (59cm x 42cm x 36cm) is used. Printed with a layer height of 0.2 and a line width of 0.65, infill density of 10% with a Gyroid infill pattern. Total weight is approximately 320g. Print two times (2 plate needed).
For extra strength, it's better to join the parts using M3x25 screws and nuts — 8 pieces in total.
