Festo ATF 55 – Bevel Pivot Segments - Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the two plastic bevel pivot segments on the vintage Festo/Festool ATF 55 circular saw
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement for the two plastic bevel pivot segments on the vintage Festo/Festool ATF 55 circular saw series. These parts (Festool spare parts #438855 and #438856) sit in the base plate assembly and form the tilt mechanism that allows bevel cuts. Without them, the saw cannot hold a precise bevel angle.
This is part of a full restoration print set for the ATF 55. I acquired this saw in very poor condition and had to completely restore it, which meant recreating several plastic parts that were missing or broken. The goal is to make these files available so other owners of this classic tool can keep it running.
Please don't expect these parts to have the same stability as the original. But they work well for me so far.
Also check out my other ATF 55 replacement parts:
Guide Rail Adjustment Segment (
#440495) → [link]
Print Settings:
Material: I used PETG. PLA might be too brittle.
Infill: 20%
Perimeters/Walls: 3+
Layer height: 0.2mm
Supports: Check orientation – may be needed depending on geometry
should be Compatible with:
Festo ATF 55
Festo ATF 55E
Festo ATF 55EB
Not compatible with the Festool TS 55 series.