1 / 2
Housing for ftdi ft232rl usb-seriell converter (YP-05) USB-C variant — zdjęcie 1
1 / 2

Housing for ftdi ft232rl usb-seriell converter (YP-05) USB-C variant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An existing model adapted to a newer connector.

Ocena
0 / 5
Polubienia
9
Pobrania
53
Wydruki
0
Wyświetlenia
211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC.

My modification is made in OpenSCAD. The ft232rl_unten_v02.stl is imported, the USB mini-B hole filled up and an USB-C hole created.

Tagi