1 / 2
Housing for ftdi ft232rl usb-seriell converter (YP-05) USB-C variant
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An existing model adapted to a newer connector.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC.
My modification is made in OpenSCAD. The ft232rl_unten_v02.stl is imported, the USB mini-B hole filled up and an USB-C hole created.