1 / 7
Record Power WG200 water slide and water collector — zdjęcie 1
1 / 7

Record Power WG200 water slide and water collector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No more mess caused by grinding water on your tools, workbench or floor.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

So you bought a Record Power WG200 and are endlessly annoyed by the mess caused by the grinding water all over your tools, the entire workbench and the floor?

That was me, hence my design of the water slide and the water collector.

The water slide can simply be placed over the side of the existing water reservoir. The intention is to remove it again when necessary.

The water collector can be installed very easily by sliding it over the handle of the tool. To do this, however, you must remove the 2 fixing screws for the side mounting location for the guide rail.
You can manually pour the water collected by the water collector back into the main reservoir. And voilà, the grinder and workbench keep it dry.

To make the water collector print as strong as possible, I printed it at a 45° angle with a wall thickness of 3 wall loops.

Tagi