1 / 1
Special gland to fit a torquebox in a V7 roll suspention frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed gland that fits a Badger Torquebox and makes it usable in a V7 roll suspention frame kit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the tube in 95a, rest in PETG or stronger and print it all solid. The idea is to fit the tube, feed the wiring harness through, slid over the ring and finaly press in the tube lock. The ring wil make it seal on the box, a tiewrap wil seal the harness to the tube, the lock will make sure it all stays like this. The battery prevesnt it from unlocking.