Quick mount for Makita Battery Chargers

This is a Makita charger quick mount, meaning you can just press it in place when you want the charger to sit firm onto the pegboard and then just pull it loose when you need to take it away for working elsewhere when you need the charger with you.

Also perhaps good to have in your truck and bus tool pegboard as well.

Feets will also give some extra clearance when placed on the ground or a table.

The Mount-wall part will fit to pegboards having a hole pattern of either 10x10 mm or 12x12 mm, pegboard on the picture is HardHead system. 

Print settings

The feets or Mount-Charger file should be printed in TPU to have a press fit effect into the Mount-wall.

Print as in the .3mf files or slicer photos. 

I printed this with a 0.6mm nozzle with 0.2 layer height and 3 walls and 15% gyroid infill. 

For the TPU print settings you can change the extrusion multiplier so that you get the Mount-Charger parts to have a press fit you want. I had extrusion multiplier set to 1.08 for my TPU. 

The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.