Scheppach HD2P Suction Port Replacement - osVAC M32 Port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scheppach HD2P suction port replacement with screw mount and osVAC M32 male connector.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This part replaces the Suction Port — part no. 14 in the user manual — of the Scheppach HD2P dust extraction system.
Unlike the original clamp-on part, this version is secured with screws to provide a more stable and reliable fit. The outlet features an osVAC M32 male connector.
The connector design was inspired by this model: https://www.thingiverse.com/thing:3384979
I further optimized the base and added the osVAC connector.
The osVAC M32 connector design is from the osVAC neo system by https://osvacneo.de
Used screws:
M4 × 20 mm screws with matching nuts and washers.
A screw length of 16 mm should probably be sufficient, but more tricky to mount.
No additional O-ring is required.
Print:
Bambulab A1 Mini, 0.4 Nozzle, 0.20 mm Standard @BBL A1M
Filament: PETG
Orientation: See pictures
Printed with support, see pictures
See also: