1 / 3
QRP Labs QMX+ enclosure with Powerpole connector — zdjęcie 1
1 / 3

QRP Labs QMX+ enclosure with Powerpole connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the excellent QMX+ enclosure from 3DSistem with a modified back panel for Powerpole connectors

Ocena
0 / 5
Polubienia
5
Pobrania
33
Wydruki
0
Wyświetlenia
310
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Original description:

"Simplified/free version  of my case for QRPLabs QMX+

Case has slightly biger tolerances but precise soldering of front and back components is still needed. You can always drill the holes a bit if you mised position on some of them.

XY size compensation is included within the design so there is no need to apply it in slicer.

To assemble it push the pcb in slot on the bottom part from back, then put front/back panels. 2.5-3mm screws needed for assembly.

Original buttons and knobs from kit fit this case."

Tagi